Kenyan customers ordered a horizontal sand mill which was delivered on time and the customers are very satisfied with the product.
Nano Horizontal Sand Mill
Model:BF-100L
Application:Nano horizontal sand mill Widely used in lithium battery materials (lithium iron phosphate, silicon carbon negative electrode, etc.), silicon powder, zirconium oxide, alumina, zirconium silicate, electronic ceramics, pesticide suspending agents, magnetic materials, ink coatings, medicine and food, biochemical industry and other nanometer materials field.
Product Introduction
The pin-type sand mill is a closed wet grinding equipment with continuous working mode. The performance and structure are very mature; the sealing structure adopts double-end mechanical seal and is equipped with a double-end mechanical seal cooling system, which is reliable and durable; with temperature and pressure monitoring and protection, it can ensure product quality; the use of zirconium oxide beads has the advantages of high grinding efficiency, good grinding fineness, wide range of use and good wear resistance.
[Material viscosity]: ≤20000 cps
[Production capacity]: 20-2000L
[Application field]: Applicable to industries such as biology, medicine, cosmetics, food, coatings, inks, color pastes, dyes, pesticides, etc.
Dispersion and grinding of product materials.
【Applicable materials】: Materials with a viscosity below 20,000 cps and high grinding fineness requirements; such as latex paint, industrial paint, color paste, water-based ink, pesticide suspension, lithium battery slurry and more than a thousand other materials
Product features
Low energy consumption ratio, high cost performance
The equipment drive uses a motor to transmit power to the main shaft through large and small pulleys, which is easy to start; the stirring rod is made of stainless steel, bearing steel or special zirconium oxide structure, which brings high efficiency while consuming less power; it is a product with a high cost performance among grinder equipment.
Easy to operate and clean
The equipment is equipped with an on-site operation box, which is integrated with the frame for easy operation; it is equipped with a bead receiving bucket, and the grinding chamber is easy to connect and disassemble with the frame. A pulley device is provided to disengage the cylinder, which can effectively clean the chamber and zirconium beads, and is used for materials of different colors and varieties.
Safety monitoring, stable products
The grinding chamber is equipped with a special cooling water jacket, which is cooled by water when the equipment is running, which has a good cooling effect. The conventional temperature rise is less than 10o. The equipment is equipped with temperature and pressure monitoring, and can set a "protection value" to ensure product quality.
Complete specifications, non-standard customization is available
Equipment specifications range from 10L to 100L, with complete specifications; non-standard customized explosion-proof type is available.
