Home > Knowledge > Content

Can empty glassware and plastic be autoclaved?

Jun 22, 2016

Autoclaving is the process of sterilizing all types of instruments by generating steam based on pressure, temperature and time. In many environments, such as industrial environments, medical environments, laboratory environments, and even some entertainment venues, autoclaves are widely used to sterilize important objects.

An autoclave is the sterilization equipment of choice because it kills all microbial life from bacteria and viruses to spores. Although autoclaves are capable of sterilizing many glass and plastic instruments, they do have certain limitations.

What types of glass and plastic materials can be autoclaved?
As mentioned before, glassware and plastics can usually be autoclaved. However, autoclaving can further weaken the plastic, especially in an already weak plastic. The following plastic materials are considered safe to be re-autoclaved:

Polycarbonate containers, although they are less elastic and can only withstand 30-50 autoclave cycles
Polypropylene and polypropylene copolymer containers that can be repeatedly autoclavable
Fluoropolymer products, such as Teflon PFA, FEP or ETFE, are also considered to withstand the autoclave process
Autoclaving resins such as PETG, PET, LDPE and HDPE is not recommended. However, they can be sterilized using gaseous ethylene oxide formaldehyde.

Glass is considered autoclavable, but borosilicate glassware is recommended because it is composed of silicon dioxide and boron trioxide, which are known to withstand high pressures better than other glass materials.

As far as closure liners are concerned, rubber and Teflon are also considered safe to autoclave. Before autoclaving, make sure to clean and rinse everything with distilled water to avoid any reaction with the pre-used chemical solution.

Another precaution to take is to make sure the bottle cap is loose to prevent a high-pressure explosion. For bottles that are not made of safety glass (or are not essentially Pyrex), cover them with aluminum foil.

Other items that can be autoclaved include tampons, labware, gauze, plastic lids, filters, water, pipettes and stainless steel, nutrient media. However, it is not recommended to autoclave metal instruments or objects as this may cause rust.

Empty glassware plastic that can be autoclaved

Which materials cannot be autoclaved?
When autoclaving glass and plastic, it is important that they are cleaned properly and do not contain harmful substances that can produce toxic vapors and explosives. Listed below are guidelines for incompatible autoclave materials:

Household glassware
Materials containing solvents or volatile, corrosive or flammable chemicals
Materials containing bleach
Phenol and triazole
Polyethylene (PE), polystyrene (PS) and high-density polyethylene (HDPE) plastics
Materials contaminated with cytotoxic drugs or chemotherapeutic agents
Nylon, acrylic and PVC
generalize
Autoclaves are sterilization equipment that are trusted based on their ability to effectively and efficiently kill any trace of harmful microbial life.

However, before autoclaving, make sure you understand what can be autoclaved. Glassware can often be autoclaved, but make sure it does not contain any harmful substances and is not household glassware as this can lead to dangerous accidents and other harmful consequences.

Plastics, on the other hand, have some more stringent restrictions. Autoclavable-safe plastics include polycarbonate, polypropylene, polypropylene copolymer, and fluoropolymer containers; however, a very few types of resin must be sterilized using gas and cannot be sterilized by autoclaving.

Send Inquiry
Categories