In high humidity conditions, refrigerators with glass doors may form condensation on the exterior glass.
There are ways to reduce this problem and keep moisture buildup away from your equipment.
How to reduce condensation on glass door units
Condensation comes down to warm air versus cold air and dew point, which is the condition where the air is too saturated to hold more water.
When a warm, humid environment encounters a cooler surface-such as the inside of a commercial refrigerated glass door-excess water vapor turns to liquid, forming condensation, which in high humidity can form on the outside of a glass door .
An example of this is drinking a cold drink in a warm room, the glass or jar is much cooler than the room conditions, so moisture will form on the glass/jar.
Typically, when a room is too humid, condensation rates are higher. Not only does this excess moisture block the view of your glass display cases, but it can also cause other problems in your premises, such as peeling paint, wood rot, and mold.
While wiping the glass is a temporary fix, it doesn't solve the root of the problem.
Precaution
The first step to reducing condensation in a commercial refrigeration unit is to balance the temperature and humidity of the building or laboratory, if possible. By adjusting the room temperature to a slightly cooler temperature, you can lower the dew point because the air becomes cooler and drier. Another option is to install a dehumidifier to control air humidity. The less chance of condensation due to supersaturation due to less circulating water.
Sometimes, the problem lies with the device itself. A damaged door gasket can allow too much hot air to enter the refrigerator, which can be a possible cause if you have excessive condensation inside the refrigerator without opening the door. A technician can inspect your system for damaged areas.
Mastering commercial refrigeration maintenance will also be helpful. The better your equipment works, the less hassle you'll have to maintain a stable temperature. In addition to equipment maintenance, check the rest of the building for areas where water could enter, such as around doors and windows. Any excess moisture or leaks can cause moisture problems.
Examples of temperature, humidity and chances of condensation forming. In this example, the surface temperature on the outside of our glass door refrigerator is 12°C, which is the average temperature for triple glass doors.
Temperature Humidity Dew point Opportunity for condensation
22℃ 50% 11.1°c min.
23℃ 45% 10.43℃ None
23℃ 65% 16.06℃ Excessive
16℃ 65% 9.42 None
As you can see, if you can't control the humidity, the only way to lower the dew point is to lower the room temperature.
The optimal conditions are 20-25°C and 35-50% humidity respectively.



