1. Purpose: Establish standard procedures for cleaning the purification workbench, and conduct timely and effective maintenance of the purification workbench.
2. Scope: Suitable for cleaning, disinfection and maintenance of purification workbench in production workshops and quality departments. 3. Responsibilities: Purification workbench operators are responsible for the implementation of procedures. 4. Procedure:
4.1 The purification workbench should be cleaned and disinfected immediately after each use. If it is not used for a long time, it should be cleaned and disinfected before use. 4.2 Cleaning agents: purified water, water for injection, detergent.
4.3 Disinfectant: 0.1% chlormethionine, 0.5~1% 84 disinfectant, 3~5% phenol, 0.5% peracetic acid, 0.05%~0.1% chlormethionine (disinfectant). The type of disinfectant needs to be changed every half month.
4.4 Cleaning tools: rags and buckets that do not shed fibers.
4.5 After use, clean the table first and place the fixtures in place.
4.6 Remove the "Running" sign of the equipment.
4.7 Soak a clean special rag in purified water, wring it out, and then wipe the operating table, inner walls, ceiling, and outer walls.
4.8 Wash the rag in purified water, wring it out, soak it in the disinfectant for at least 3 minutes, wring it out, and then wipe and disinfect the above area.
4.9 For operating tables that have been used with bacterial strains, the ultraviolet lamp should be turned on for irradiation and sterilization for 30 minutes. 4.10 The clean room with a purification operating table should be air fumigated and disinfected at least once every half month. See the "Standard Procedure for Cleaning and Disinfection of Clean Factory Buildings" (SOP-).
4.11 Fill in the cleaning record.
Standard procedures for clean bench cleaning
Jan 05, 2016
Send Inquiry



