Home > Knowledge > Content

What details should be paid attention to in the production of spray dryer?

Dec 07, 2023

In recent years, spray dryer spray drying technology has been widely used in the pharmaceutical industry. In the field of solid preparations, this technology is often used for the drying of highly heat-sensitive drugs and drugs that are easily decomposed during the concentration of liquid materials. During the application process, different raw materials will have different requirements for spray drying of spray dryers. How to meet these requirements and what details should be paid attention to are issues of common concern to both equipment designers and users.
Ensure cleanliness requirements
Some main processes of API production need to be carried out in a 100,000-level clean environment. Spray drying by spray dryer is an important process for quality control. In order to ensure the quality of medicines, the parts of the spray dryer that contact the material should be made of stainless steel. For materials with strong acid corrosion, it is best to use 316L stainless steel. The drying chamber, cyclone separator, filter and other parts that directly contact the material should have smooth inner walls, no dead corners, and be easy to disassemble and clean.
Spray dryer Due to the large system of the spray dryer, the entire spray dryer cannot be placed in the clean area. Often only the part where the material is collected is placed in the clean area. In this case, the system requires good sealing performance to prevent external contamination of the system.
Avoid wall sticking
In the spray drying process of solid preparations (**Chinese medicines), the wall sticking phenomenon of the sludge dryer is a prominent problem that hinders the normal operation of the spray dryer. Material sticking to the wall is not only detrimental to collection operations, but over time, sensitive wall-sticking materials will deteriorate and become unqualified materials. From a process perspective, solutions include selecting appropriate solvents, adding excipients, and changing process parameters. However, these methods do not have much room for adjustment, so fundamental solutions must be sought from an equipment perspective.
In recent years, domestic and foreign experts have studied the problems of wall sticking and agglomeration during the drying process. They believe that the main cause of wall sticking is wall temperature, and thus summarized five measures to prevent wall sticking: using a sandwich drying tower, during which Use air cooling to keep the wall temperature below 50°C; introduce secondary air tangentially through the cyclone blades on the tower wall to cool the tower wall; install an air broom consisting of a row of nozzles near the wall of the tower and move it along the tower wall Rotate slowly; add an air hammer to the tower wall, and force the material stuck to the wall to break away through the blow of the air hammer; increase the processing accuracy, and polishing the inner wall of the tower can also reduce wall sticking.
Improve automatic control performance
Spray dryer spray drying is a continuous production process. The control points of its closed cycle system include: feed concentration, feed speed, inlet air speed, inlet air temperature, system pressure, pressure difference of each component, gas purity detection, etc., relying on traditional Manual adjustment is very difficult, so the system's self-control must be strengthened. A good automatic control system can make the entire spray dryer spray drying system operate smoothly, reduce product failure rates, and reduce safety hazards.
Meet different physical property requirements
After the raw materials are spray-dried by the spray dryer, the formulation process needs to be further completed. Therefore, in terms of improving the formulation effect and the absorption effect of the final drug, different production requirements will put forward different physical properties of the spray-dried products of the spray dryer. Require.
The packaging of drugs is generally controlled based on volume, which requires the product to have a stable bulk density and good fluidity, while oral granules often require instant dissolution. By changing the dispersion of atomization or appropriately changing the operating conditions to control the drying rate, products with different bulk densities can be produced, but the range of changes is limited.
Currently, there is a new technology in improving physical properties - foam spray dryer spray drying, that is, the feed liquid is foamed first and then spray-dried by a spray dryer. This method was originally proposed to improve thermal efficiency and was later used to adjust the physical properties of the product. It has been proven that the products produced by spray drying with foam spray dryers have large particle sizes, are porous, have many depressions, have rough surfaces, and have good instant solubility.
In addition, oral APIs will also have some specific requirements, such as particle shape, etc. Production practice has proven that particles of different shapes can be obtained by changing the atomization method.
Safety protection measures are essential
The safety of certain drugs will also put forward higher requirements for the protection design of equipment. For materials dissolved in organic solvents, the entire system must meet explosion-proof requirements when drying. At the same time, explosion-proof types must be selected when designing accessories such as motors, instruments, and control valves. In addition, in order to prevent the solvent and air from mixing into explosive gas, the system must adopt a closed circulation system, and the carrier must use inert gas, such as nitrogen. In addition, the drying of some easily oxidized materials also requires the use of a closed circulation system using nitrogen as the carrier.
Environmental protection indicators must meet standards
The products spray-dried by the spray dryer are fine particles and easily form dust. In order to meet the requirements of environmental protection, it is not enough to use the currently conventional cyclone separator to separate products and purify the exhaust gas. A bag dust collector can also be used to purify the exhaust gas to make the dust content of the exhaust gas less than 50 mg/cubic nanogas to meet the standards. ; Or use a wet scrubber to reduce the dust content in the exhaust gas to 15 to 35 mg/cubic nanogas. When using nitrogen as a carrier, the system must be sealed and the exhaust port must be directed outdoors.
Improving heat utilization is a top priority
The maximum temperature of hot air is 250℃~500℃ in parallel flow operation and 200℃~300℃ in countercurrent operation. The outlet temperature after atomization drying is generally controlled at 60℃~100℃, and its heat utilization rate is low, so This is also the shortcoming of spray drying by spray dryer.
At present, the thermal efficiency of domestic industrial-scale spray dryers is generally 30% to 50%. The thermal efficiency of foreign spray dryers with waste heat recovery can reach 70%, but this equipment only has economic significance when the production capacity is greater than 100 kg (water)/hour. However, when nitrogen carriers and organic solvents are used, a closed circulation system can be used to circulate nitrogen and condense the solvent, thus effectively reducing production costs.
But in general, the cost issue during the use of spray dryers requires further research by equipment designers and manufacturers to find better cost reduction strategies.

Send Inquiry
Categories