Home > Knowledge > Content

How to deal with water leakage in autoclave

Feb 25, 2016

Water leakage from an autoclave generally refers to leakage of condensate water discharged from the pressure steam sterilizer or water in the water tank. The processing method is as follows:

For condensate water leakage, the water tank and drainage pipes can be cleaned in time to ensure that the condensate water is discharged smoothly.

For water leaks in the water tank, you first need to turn off the water source, clean the leaked area, and check whether the water tank seal is good. If the water tank has cracks or is not tightly sealed, the tank will need to be replaced or repaired.

When operating an autoclave, you need to regularly check whether there are leaks in various parts of the equipment, and deal with them promptly if leaks are found.

If the water leakage is serious and cannot be handled by yourself, you need to contact the manufacturer for repair and treatment in time.

In short, when using an autoclave, you need to keep the equipment clean and dry, and check and maintain the equipment regularly to avoid failures such as water leakage.

Send Inquiry
Categories