Home > Knowledge > Content

Installation precautions for viscometers

Dec 25, 2023

1. When loading and unloading the rotor, care should be taken. The connecting screw should be slightly lifted for operation, and excessive force should not be applied. Do not place lateral force on the rotor to prevent it from bending.
2. Please do not place the viscometer with the rotor installed on it sideways or upside down.
3. Keep the connection screw and rotor connection end face and thread clean, otherwise it will affect the rotor's shaking degree.
4. When lifting and lowering the viscometer, it should be supported by hand to prevent it from falling due to its own weight.
5. After replacing the rotor, please enter the new rotor number in a timely manner. After each use, the replaced rotor should be cleaned (wiped clean) in a timely manner and placed back in the rotor frame. Please do not leave the rotor on the instrument for cleaning.
6. When replacing the measured liquid, please clean (wipe clean) the rotor and rotor protection frame in a timely manner to avoid measurement errors caused by mixing the measured liquid.
7. The instrument and rotor are matched one-on-one, please do not confuse multiple instruments and rotors.
8. Please do not disassemble or adjust instrument parts at will.
9. When moving and transporting instruments, the yellow cap should be installed at the connecting screw, and the screw should be tightened and placed in the packaging box.

Send Inquiry
Categories