After being used and verified by many customers, the function of the centrifugal spray dryer has been recognized. Do you know how this device works?
So far, centrifugal spray dryers have been widely used in liquid process molding and drying industries. The equipment is suitable for producing powders, granules or blocks from solutions, emulsions, suspensions and pumpable paste liquid materials. solid, etc.
During the normal operation of the centrifugal spray dryer, the air is first filtered by the filter, and then heated by the heater. Then the air enters the air distributor at the top of the centrifugal spray dryer, and the hot air is spirally uniform. Enter the dryer.
The material liquid is pumped from the material liquid tank through the filter to the centrifugal atomizer on the top of the dryer. In this process, the material liquid will be decomposed into extremely small mist droplets, and then fully contacted with the hot air. Therefore, transpiration can be completed quickly.
In this way, under the effect of the centrifugal spray dryer, the feed liquid can be dried in a very short time and the finished product can be obtained. The products are discharged from the bottom of the drying tower and the cyclone separator, and the waste gas is discharged from the fan. It should be noted that there are certain conditions for using a centrifugal spray dryer. If you want to give full play to the advantages of this process, you must first meet the standards of particle size distribution, residual moisture content, bulk density and particle shape of the product. In this way, the drying process of the material is completed in a short time and the quality is guaranteed.


