Spray dryer Spray drying is one of the fastest-growing equipment in drying equipment. There are three conventional atomization methods: rotary atomization, pressure atomization and air flow atomization.
The characteristics of rotary atomization spray drying are large single-machine production capacity (spray volume up to 200t/h), easy control of feed volume, large operating flexibility, and relatively accurate application.
The characteristic of pressure atomizer spray drying is that it can produce coarse particles and is easy to maintain. Since the nozzle hole is very small and easy to clog, the material liquid must be strictly filtered. The nozzle hole is easy to wear and must be made of wear-resistant materials. There is also a new structure for pressure nozzles, called pressure-airflow nozzles. It is characterized by a pressure nozzle in the center and an airflow nozzle in the surrounding environmental gap. Atomization is divided into two stages: the pressure nozzle first forms a liquid film, and this liquid film is atomized for the second time by the air flow, making the mist droplets finer. The advantages of this type of nozzle are: (1) By adjusting the pressure of the compressed air, the droplet diameter can be adjusted, making the operation simple; (2) Large-volume, high-viscosity liquid materials can also be atomized into fine mist droplets; 3 If compressed air is deactivated, the original pressure nozzle can still be used.
Airflow atomizers are mainly used in laboratories and intermediate factories, and their power consumption is large centrifugal spray dryers. Material liquids that cannot be atomized by the first two atomizers can be atomized by an airflow atomizer. High-viscosity pastes, pastes and filter cake materials can be atomized using three-fluid nozzles.
Air flow dryers are mature in mechanical technology and can be designed directly if there is operational data. At present, there are many drying equipment manufacturers that can provide this type of equipment. It is fully used for drying powdery and granular materials in chemical, pharmaceutical, building materials and other industries. The products that have been dried by this series are: starch, glucose, fish meal, sugar, table sugar, distiller's grains, feed, gluten, plastics Resin, coal powder, dyes, etc. It is suitable for wet materials with relatively large moisture content and in the form of paste, as well as materials that cannot be dried by other air drying methods, such as: copolymers of vinyl acetate and vinyl chloride, fiber acetate Flocc, catalyst, etc.
Centrifugal spray dryers are mostly used in: food industry, food and plants, sugars, plastic resins, chemical industry.
Centrifugal spray drying is the most widely used process in the liquid process forming and drying industry. *Suitable for producing powdery, granular or lumpy solids from solutions, emulsions, suspensions and pumpable paste liquid feedstocks. Therefore, when the particle size distribution, residual moisture content, bulk density and particle shape of the finished product must meet the highest standards. Drying with a spray dryer is an ideal method.
Moreover, the production process of the centrifugal spray dryer is simplified and the operation and control are convenient. Liquids with a moisture content of 40-60% (maximum materials can reach 90%) can be dried into powder products at one time. After drying, there is no need to crush and screen, which reduces the production process and improves product purity. The product particle size, bulk density, and moisture content can be adjusted within a certain range by changing operating conditions, and control and management are very convenient. It dries quickly. The surface area of the liquid material is greatly increased after atomization. In the hot air flow, 95%-98% of the water can be evaporated in an instant. It only takes a few seconds to complete the drying. It is most suitable for drying heat-sensitive materials. It has good uniformity, fluidity and solubility, and the product has high purity and good quality.
Currently, there are many types of centrifugal spray dryers, and you can choose one based on your industry requirements. Common centrifugal spray dryers include: a. LPG series high-speed centrifugal spray dryer, b. DIS series high-speed centrifugal spray dryer, c. LGZ series high-speed centrifugal spray dryer.
These types of spray dryers all have the following features: fast drying speed, increased surface area of the material liquid after atomization, and 95%-98% of the water can be evaporated in an instant in the hot air flow. It only takes 5-15 seconds to complete drying, with instant drying characteristics. It has a unique air distribution device, which reduces the equipment resistance and effectively provides the processing air of the dryer. The production process is simplified and suitable for continuous controlled production. Liquids with a moisture content of 40-90% can be dried into powder at one time, reducing crushing, screening and other processes to improve product purity.
Centrifugal spray dryers are mostly used in: food industry, food and plants, sugars, plastic resins, chemical industry.
Spray dryer maintenance and operation hazard precautions
1. Granulation is an important link in the PTC production process. Maintaining the normal operation of the spray granulation dryer is a necessary condition to ensure the stability of the boiling granulation dryer in PTC production. Regular cleaning, maintenance and upkeep can help detect problems in time, solve potential failures, reduce downtime and ensure normal and stable production.
2. If the spray granulation dryer is operated for a long time or due to improper operation, aggregates will appear in some spray granulation dryers and affect normal operation. At this time, the work needs to be stopped for cleaning. When the oxygen concentration does not reach 21%, it is strictly prohibited to open the inspection door; otherwise, it will easily cause the operator to be hypoxic and suffocate. To clean the aggregates in the drying tower, the cleaning door should be opened, and the funnel-shaped bottom aggregates should be swept away with a long broom. Open the Discharge valve, when opening the refrigerator, the circulating water must be turned on, and the inside of the boiling granulating dryer tower must be flushed with tap water. To remove dust collected in the cyclone separator boiling granulation dryer, you also need to open the cyclone separator, clean the aggregates with a broom, and flush with water if necessary. To clean the dust collector of the bag filter, you should turn on the control switch and tap continuously, then open the cleaning door, tap the bag filter, and finally replace the filter bag. For the cleaning of the slurry pipeline system, the drain valve of the two-way filter should be opened, the filter screen and pipelines of the boiling granulating dryer should be cleaned, then the material pump should be opened, water should be used instead of material, and the pump tube, pressure stabilizing package and pipeline.
3. After a period of operation (usually about 600 hours), the spray granulation dryer and boiling granulation dryer need to be inspected and maintained as necessary. For the feeding system, filters, pipes, valves, nozzles, etc. should be checked to see if they are blocked, cleaned regularly, and the nozzles of the boiling granulating dryer should be checked for wear so that they can be replaced when necessary. Check whether the material pump is leaking oil, whether the pressure is normal, whether the oil level is normal, etc. For the fan of the boiling granulating dryer, check whether the shaft and bearing are short of oil and heat, whether there is vibration, noise, etc. If necessary, clean the fan blades and check the balance of the fan blades. For the heater, check whether the hot boiling granulating dryer pipe is normal, and clean the filters at the oil pipe, oil pump, and oil nozzle if necessary. In addition, you should also pay attention to whether each motor generates heat, vibration, abnormal noise, etc., and whether the instruments and electrical appliances in the control cabinet are working normally.
4. When the spray drying equipment is in operation or for a period of time after shutdown, its surface temperature is relatively high. Please do not touch the bag filter, cyclone separator, air duct, atomizer, exhaust fan, observation window and other components with your hands.
5. When opening and closing the inspection door, disassembling and assembling the air duct, cyclone separator, and atomizer, be careful of your hands and fingers being pinched. Adjustment method of the supporting wheel of the rotary drum dryer Maintenance and inspection points of the grinding roller device of the ultra-fine pendulum mill Maintenance and repair points of the regulating valve Common troubleshooting methods of the synthesis tower outlet gas/circulating water heat exchanger sealing plate leakage Cooling tower installation procedures and essentials FRP Cooling tower technical maintenance and troubleshooting
What are the differences in maintenance between centrifugal spray dryers and airflow spray dryers?
Nov 15, 2023
Send Inquiry



