stacked lenticular filter Stainless Sanitary Filter introduce
Microporous membrane filter is a membrane separation technology. The filter is a cylindrical tube structure made of 304 or 316L stainless steel. It uses a foldable filter element as a filter element to filter out particles and bacteria in liquids and gases.
The membrane stack filter element precision filter is a filter that uses a membrane stack filter element as a filter element. The membrane stack filter element is a filter material that uses deep filter paperboard as a filter material. It effectively removes impurities and microorganisms in the liquid through mechanical interception, electrostatic adsorption, etc. This product adopts a double-layer support separation design, which increases the effective filtration area of the filter element and extends its service life.
Stainless steel laminated lens filters are widely used in many fields such as food and beverage, beer and liquor engineering, fine chemical engineering, biopharmaceutical engineering, water treatment engineering, etc. It is a high-quality filter that is easy to operate, corrosion-resistant, has strong production capacity, and is easy to clean.
stacked lenticular filter Stainless Sanitary Filter features:
12 inch 2 filters core |
16 inch 2 filters core | |
| A | 1210 | 1230 |
| B | 200 | 250 |
| C | 325 | 450 |
| D | 280 | 280 |
| N1.N2 | 38 | 51 |
12″ Stainless Sanitary Lenticular Filter
The stainless sanitary lenticular filter can take diatomite filter, active carbon filter, cellulose filter etc
Fully comply with GMP requirement, professionally mechanical polishing and electrolytic polishing
Internal polish to be Ra< 0.6 um, external polish to be Ra< 0.8 um
Maximum operating pressure 90 psi
Housing material available in stainless 304 and 316L
O-ring available in EPDM, PTFE, Viton, and Silicone
Suitable for filtration of beer, syrup, fruit juice, and juice concentrate etc
Sanitary Lenticular Filter Housing applicable for food & beverage, pharmaceutical, chemical and electronic filtration
Able to accommodate 1,2 or 3 piece of 12″ stack-able lenticular filter
16″ Stainless Sanitary Lenticular Filter
The stainless lenticular filter housing can take diatomite filter, active carbon filter, cellulose filter etc
Fully comply with GMP requirement, professionally mechanical polishing and electrolytic polishing
Internal polish to be Ra< 0.6 um, external polish to be Ra< 0.8 um
Maximum operating pressure 90 psi
Housing material available in stainless 304 and 316L
O-ring available in EPDM, PTFE, Viton, and Silicone
Suitable for filtration of beer, syrup, fruit juice, and juice concentrate etc
Applicable for food & beverage, pharmaceutical, chemical and electronic filtration
Able to accommodate 1,2 or 3 piece of 16″ stack-able lenticular filter
Hot Tags: stacked lenticular filter stainless sanitary filter, China stacked lenticular filter stainless sanitary filter manufacturers, suppliers, factory



















