Stainless steel small spray dryer application
It is suitable for the production of trace particle powders in laboratories of universities, research institutes and food, pharmaceutical and chemical enterprises. It has a broad spectrum of applicability to all solutions such as emulsions and suspensions. It is suitable for drying heat-sensitive substances such as biological products, biological pesticides, enzyme preparations, etc. Because the sprayed material is only exposed to high temperature when it is sprayed into mist-sized particles, it is only heated for a moment, which can keep the active ingredients of these active materials intact after drying.
Stainless steel small spray dryer parameter
1. The spray dryer adopts dual control modes of full automatic control and manual control, and the entire experimental process is dynamically displayed on the color touch screen (animation)
2. Inlet temperature control: 30℃～300℃
3. Outlet temperature control: 30℃～200℃
4. Evaporated water volume: 1500mL/H～2000ml/h
5. Maximum feed volume: peristaltic pump can be adjusted to a maximum of 2000ml/h
6. Minimum feed volume: 50mL
7. Can be upgraded to a two-stage separation and collection system
8. Real-time PID temperature control technology, inlet and outlet temperatures are displayed online in real time, and the temperature control accuracy is ±0.5℃
9. Drying time: 0.8～1.0S
10. The machine has a misoperation protection function. When the fan and heater switches are used in the wrong order, the machine automatically reminds to prevent novices from misoperating and damaging the machine.
11. The spray dryer has a shutdown protection function: when shutting down, just press the stop button, and the machine will stop running immediately except for the fan, ensuring that the equipment will not burn out the heating part due to misoperation (forcibly shutting down the fan).
12. Color LCD touch screen parameter display: inlet temperature/outlet temperature/peristaltic pump speed/air volume/needle frequency
13. Nozzle diameter: 0.5mm/0.7mm/0.75mm/1.0mm/1.5mm/2.0mm optional, and can be customized according to requirements
14. Equipped with a nozzle cleaner (needle), when the nozzle is blocked, it will automatically clear, and the frequency of the needle can be automatically adjusted
15. The spray dryer is made of stainless steel, the atomization structure of the two-fluid spray, the spray, drying and collection system are made of transparent high-quality borosilicate heat-resistant glass material
16. Built-in imported oil-free air compressor, the particle size of the spray powder is normally distributed, the fluidity is good, and the noise is very low, which meets the national laboratory noise standards;
17. Intelligent control system, replacing the PLC control on the market, with stronger stability
18. Time setting function: users can set the working time of the machine by themselves, without manual supervision, and the machine stops working at the end of the working time, without manual supervision, which greatly saves customers' precious time for experiments.
19. Automatic fan stop function: After the instrument is finished working, the fan should be kept in working state to allow the glass to cool down. This machine is set through an intelligent program. When the inlet temperature is lower than 30 degrees, the fan will automatically shut down without manual shutdown.
20. Machine power: 3.8KW/220V
21. Tower wall purge device, higher material yield
22. Spray head cooling device (optional)
23. Can be directly upgraded to a nitrogen circulation system for drying organic solvent materials
24. Equipment size: 1380mm (height) × 770mm (length) × 590mm (width)
Hot Tags: stainless steel small spray dryer, China stainless steel small spray dryer manufacturers, suppliers, factory, customer service of drying equipment, retailer of drying equipment, agent of drying equipment, workshop of drying equipment, recommendation of drying equipment, portable drying equipment
