Electric Lifting and Rotating Double-layer Glass Reactor
Introduction:
Double-layer glass reactor is a commonly used biochemical instrument, widely used in modern fine chemicals, biopharmaceuticals, scientific research experiments and other industries. Concentration, distillation, reflux, separation and purification can be carried out under constant speed, constant force and constant temperature conditions. Reaction is an ideal instrument and equipment for teaching, experiment, pilot test and production.
The lifting rotating reaction kettle is based on the ordinary double-layer reaction kettle, and adds the electric lifting function of the kettle lid and the above stirring system. When the kettle lid is raised, the kettle body can be rotated 120 degrees to the left through the handwheel to facilitate pouring water. Compared with traditional reactors, the operating efficiency is greatly improved, saving time and costs.
Features about Lifting and Rotating Double-layer Glass Reactor:
1. The reaction kettle body is made of high borosilicate glass (GG-17 material), which has excellent physical and chemical properties. The bottle body is transparent and the reaction liquid material can be seen.
2. The lid of the kettle is made of polytetrafluoroethylene, which is safer for lifting.
3. The main body is made of cold plate spray plastic + aluminum alloy material, which is beautiful, strong and corrosion-resistant.
4. The stainless steel stirring rod is covered with PTFE, which is suitable for stirring a variety of solvents, and is non-polluting and corrosion-resistant.
5. The lifting and rotating are all agitated by deceleration and booster motors, with stable operation, large torque, no sparks and long service life.
6. The kettle cover and the upper stirring system can be electrically controlled to rise and fall.
7. When the lid of the kettle and the stirring system rise, a limit switch is set at the rising top position, and it stops rising after reaching the position.
Note: There is no limit control when the kettle cover and stirring system are lowered, and the operator must not leave the operation site. When lowering to a suitable position, press the stop button in time to prevent the kettle body from being crushed!
8. After the kettle cover and the upper stirring system are raised, the kettle body can be rotated 120 degrees to the left by the hand wheel, which is convenient for pouring and cleaning the kettle body.
9. The pipeline of the inlet and outlet oil circulation nozzle of the kettle body adopts three-layer pipeline of stainless steel hose + insulation cotton + insulation net, which has better insulation and safer use. The oil inlet and outlet pipes have been fixed side by side on the right side of the reactor. When the external circulation equipment is connected, it is only necessary to connect the external inlet and outlet pipes. When the kettle body rotates, the glass inlet and outlet oil circulation nozzle will not be damaged due to continuous rotation.
10. PTFE components + mechanical seal, proprietary technology, can ensure good vacuum and long service life.
11. The speed controller of this product is double-digit display of speed and temperature (can display the temperature in the kettle). The speed can be set by the speed control knob, which is intuitive and convenient; it is also equipped with a temperature measuring probe (PT100) in the kettle.
12. The overall structure is compact and reasonable, equipped with universal wheels, which can be moved as a whole and easy to operate. No dead angle glass inclined discharge valve, which can effectively reduce the dead angle of stirring and facilitate discharging. This product is equipped with a vacuum display function, and the best working vacuum can be selected for low boiling point materials.
|
Basic parameters |
Name |
Electric lifting and rotating double-layer glass reactor |
|||||
|
glass material |
GG-17 |
||||||
|
frame material |
Cold plate spray plastic anti-corrosion + aluminum alloy |
||||||
|
way of moving |
Universal corner wheel with brake |
||||||
|
Reaction bottle volume |
10L |
20L |
30L |
50L |
100L |
||
|
Mezzanine capacity |
6L |
8L |
10L |
13L |
18L |
||
|
Flange oil circulation port |
Low in and high out ￠35 flange |
||||||
|
Number of lids |
six |
||||||
|
discharge port off the ground |
450mm |
||||||
|
Kettle reaction temperature |
-80-250 ℃ |
||||||
|
Vacuum |
0.098Mpa |
||||||
|
stirring speed |
0-450rpm |
||||||
|
Stirring shaft diameter |
15mm |
||||||
|
lifting power |
40W1/12.5 |
||||||
|
stirring power |
90W1/3 |
120W1/3 |
250W1/3 |
||||
|
Voltage/frequency(V/Hz) |
220V/50Hz |
||||||
|
Dimensions (mm*mm*mm) |
910*730*2030(After rising2610) |
910*740*2130(After rising2710) |
980*910*2200(After rising2780) |
1000*910*2300(After rising2880) |
1100*920*2400(After rising2980) |
||
|
Package size(mm*mm*mm) |
1940*610*1030 |
1950*610*1040 |
2280*670*1090 |
2380*670*1095 |
2480*730*1195 |
||
|
Packing weight (KG) |
105 |
120 |
135 |
150 |
180 |
||
|
Function configuration |
Speed mode |
Frequency |
|||||
|
motor configuration |
Low-speed booster motor, speed ratio 3:1 |
||||||
|
Speed display mode |
Digital Display |
||||||
|
Temperature display mode |
PT100 sensor digital display |
||||||
|
PTFE component mechanical seal |
￠50 flange stirring port |
￠60 flange port |
|||||
|
Vertical high-efficiency double return condenser |
100*600mm |
100*700mm |
120*600mm |
||||
|
Reflux (distillation) unit |
Return elbow with discharge switch, 50# ball mill port |
||||||
|
Dropping device (constant pressure funnel) |
1L 40#Standard port |
2L 40#Standard port |
|||||
|
pressure relief device |
34# standard port pressure reducing valve |
||||||
|
Temperature tube |
24# standard mouth |
||||||
|
solid feed |
￠80 flange with PTFE cover |
||||||
|
Feeding method |
Inclined discharge glass discharge valve, ￠80 flange |
||||||
|
Vacuum display mode |
vacuum gauge |
||||||
|
Stirring Connection |
gimbal connection |
||||||
|
stirring rod |
Scanning + pushing stainless steel rod, outsourcing PTFE |
||||||
|
Our laboratory glass and experimental instruments are all independently developed, and can be tailored according to the actual requirements of customers. |
|||||||
Hot Tags: 10l lifting double-layer glass reactor, China 10l lifting double-layer glass reactor manufacturers, suppliers, factory, 5L Single Layer Glass Reactor, 50L Single Layer Glass Reactor, Glass Reactor, , Manual Hydraulic Test Stand, Dispersion Machine
