glass bioreactor Features:
The single-layer glass reactor has a stirring system, a condensation reflux system, a dripping system, and a heating system. The bath heats the material in the reactor while stirring the material, which can improve the evaporation efficiency under vacuum conditions (need to be connected to a vacuum device). The solvent vapor is cooled into liquid when passing through the glass condensation coil (need to be connected to a cooling device), which can be refluxed into the reactor or recycled through the bottom valve of the reflux elbow. After the reaction is completed, the material can be discharged from the side outlet at the bottom of the reactor. The use of this series of products requires supporting system devices such as vacuum devices and cooling circulation devices.
glass bioreactor parameter
|
Model |
BF-10L |
||
|
Effective volume in the kettle (L) |
10L |
||
|
Kettle body specifications |
seven-mouth spherical |
||
|
Voltage |
Stirring 220V50HZ Heating 220V50HZ |
||
|
Total power |
3.62KW |
||
|
Glass material components |
High borosilicate glass 3.3 |
||
|
Kettle body temperature resistance range |
-80℃～+250℃ |
||
|
Temperature measurement accuracy |
±1℃ |
||
|
Constant pressure funnel volume (L) |
1L |
||
|
Constant pressure funnel specifications |
The upper opening is ground at 29# and the lower opening is ground at 40# |
||
|
Condenser specifications |
φ40mm flange port under Φ85×600H (mm) |
||
|
Condenser circulation connection size |
Pagoda outer diameter 12mm |
||
|
Condenser heat exchange area (㎡) |
0.3㎡ |
||
|
Allowable pressure in the kettle (Mpa) |
-0.1-0.0 |
||
|
Heating pot |
Heating power (W) |
3500W |
|
|
Temperature control range |
Room temperature-180℃ |
||
|
Temperature control accuracy |
±1℃ |
||
|
Stirring motor |
Rated power (W) |
120W |
|
|
Speed adjustment method |
Frequency |
||
|
Speed adjustment range (rpm) |
0~600rpm/min |
||
|
Cauldron body opening (seven openings) |
Stirring port |
80# flange mouth |
|
|
Constant pressure funnel mouth |
40 grinding mouth |
||
|
Thermometer port |
24 grinding mouth |
||
|
Exhaust/liquid inlet |
34 grinding mouth |
||
|
Solid feeding port |
125# flange mouth |
||
|
return connection |
50 ball grinding mouth |
||
|
Discharge port |
80 flange mouth |
||
|
Main frame material |
SU304 stainless steel + cold plate electrostatic spraying |
||
|
Impeller |
Φ15×700H (mm) Leaf span 160 mm |
||
|
Temperature Sensor |
PT100, glass thermometer sleeve |
||
|
Release valve |
34# glass PTFE valve, air release port 12mm |
||
|
Vacuum exhaust port size |
Pagoda outer diameter 12mm |
||
|
Discharge valve |
No liquid accumulation discharge valve, the outer diameter of the liquid outlet is 33mm |
||
|
Operating ambient temperature (℃) |
5-35 |
||
Hot Tags: glass bioreactor, China glass bioreactor manufacturers, suppliers, factory, Box type Resistance Furnace, Petroleum Penetrometer, Spray Dryer, Spiral Standing Test Bench, Digital Tablet Friability Tester, Mini Agitated Ball Mill
